Set Sleep Mode; Set Language; Reset To Factory Defaults; Frequently Asked Questions - Pandigital PI1003DW User Manual

1. On the Windows System Tray, click the hardware removal icon.
Click the Safely remove USB mass Storage device message corresponding with the DPF device drive.
2.
3. When the message "This device can now be safely removed from the computer" appears, you can disconnect the USB cable from your computer.
Windows XP
1. On the Windows System Tray, click the hardware removal icon.
2. Click Remove Hardware Safely.
3. Select the storage device corresponding with the DPF, and then click Stop to disconnect. A final dialog box opens.
4. Click Close.
5. When the message "It is now Safe to Disconnect Hardware" appears, you can disconnect the USB cable from your computer.
Connect DPF to Macintosh Computer
1. Use a USB cable to connect the DPF to your Macintosh computer.
2. Macintosh will recognize the DPF as an external storage device.
3. Drag and drop files between the two devices as you normally move files.
Disconnect DPF from Macintosh Computer
1. To safely disconnect the DPF from your Macintosh, select DPF's icon on your desktop and press Command-e to eject the disk.
2. When the icon is no longer on the desktop, it is safe to unplug the USB cable.
S e t S l e e p M o d e
The DPF will stay on until you power it off, however, to save power you can set it to automatically go into a sleep mode when left idle for a specific amount of time.
On the HOME screen, press MENU to display the Setup Menu.
1.
Select Set Sleep Mode, and then select the desired setting.
2.
OFF (default) = Power saver is 'disabled'; DPF will remain on until you power it off or change the sleep mode setting
2/4/8 Hours = The DPF will automatically go into sleep mode when left idle the specified amount of time
3. Select Done.
S e t L a n g u a g e
Depending on model, this DPF may include multiple languages for the user interface display.
On the HOME screen, press MENU to display the Setup Menu.
1.
Select Set Language, and then select the desired language.
2.
R e s e t t o F a c t o r y D e f a u l t s
If you have changed function settings, using this feature will restore all settings to the factory pre-set defaults.
On the HOME screen, press MENU to display the Setup Menu.
1.
2. Select Reset to Factory Defaults, and then select Yes to reset, or No to leave current settings.
Press EXIT to return to the HOME screen.
3.
F r e q u e n t l y A s k e d Q u e s t i o n s
Q: How do I set up my DPF?
A: It is very simple to get your Digital Photo Frame setup. Just plug the power adapter into the DPF and into a standard wall outlet, and then power it on. A slideshow will
begin displaying the images pre-loaded in the internal memory. To view your own photos, insert a memory card into the card slot on the side of the DPF. Select Start
Slideshow from the memory card option screen.
Q: What memory cards can the Digital Photo Frame Read?
A: Compatible memory cards include: Secure Digital™ (SD), MultiMedia Card™(MMC), xD Card, Memory Stick™(MS), MemoryStick Pro™, and Memory Stick Pro Duo™.
Q: I set up the Digital Photo Frame; why won't it turn on?
A: The power adapter may not be securely connected to the DPF or the power switch may not be in the ON position.
Q: I have a memory card in the DPF; why can't I view my photos?
A: A) Be sure that the memory card is one of the formats listed above and that the files on the card are JPEG images files. Some digital cameras save images in other formats.
Refer to your camera's user guide if your photos are not JPEG files.
B) Make sure the memory card is inserted all the way into the card slot.
C) On the HOME screen, press MENU, choose Select Media Source, select the desired media source, and then press ENTER. Press EXIT to return to the HOME screen
and then select the PHOTOS-PLAY button. The slideshow should begin displaying your photos.
Q: Why is the photo display slower with some photos than others?
12