Panasonic WJ-NV300K Operating Instructions Manual page 41

■ Schedule to record
3 schedule recordings and 3 event recordings each
can be set up on Time table 1 and 2. Within the same
time table, event recording has priority over schedule
recording.
[Schedule recording] (☞ Page 40)
[Event recording]
Set the time table for recording in the event that an
alarm occurs. Alarm that falls into a time table that
has not been set up will not trigger recording. Refer
to page 39 for how to configure the time bar.
[e-Mail]
To send an alarm e-mail when an event occurs, mark
this item.
[Panasonic alarm protocol]
Mark the checkbox of this item to automatically trans-
mit information on an event that occurs to a PC using
the Panasonic alarm protocol.
[Previous] / [Next]
The schedule settings to be configured will be
switched over.
[Back] button
Click the button after completing the settings. The
screen returns to the [Recording setup] tab.
41