Set Up Recording/Events [Rec & Event] - Panasonic WJ-NV300K Operating Instructions Manual

Set up recording/events [REC & event]
The "REC & event" page has 3 tabs; the [Recording setup] tab, the [Event setup] tab and the [Advanced setup]
tab.
Recording setup tab [Recording setup]
Configure the settings relating to schedule recording. Set the day(s), time table(s), frame rate and image quality
for recording.
■ Schedules
Recording will be performed according to the sched-
ules set in advance. Select the day(s) of the week and
the time table(s).
[Days to record]
Select the day(s) of the week to record. Mark the
checkbox(es) of the day(s) of the week to record.
[Schedule to record]
3 time tables for schedule recording can be set up for
"[Time table 1]". The time bar indicates 24 hours in
steps of 15 minutes.
Click the desired position on the time bar to desig-
nate the start and end time. When the time is desig-
nated, the time bar turns red.
Note:
• At the default, schedule recording has been set
for 24 hours on Time table 1. To delete the desig-
nated start and end time, right-click the timetable.
• The recording time table can be set by dragging
the start and end time on the time bar with the
mouse.
• Be sure to set so that there is no overlap between
the 3 time tables. When attempting to set the
same time as already set on another time bar, the
time immediately before or after the overlapping
time will be set.
[Advanced >] button
The "Advanced schedule setup" page will be dis-
played. In addition to 3 schedule recordings, 3 event
recordings can be set up. The schedule settings can
be set up to 2 patterns. (☞ Page 40)
■ Recording setup (All cameras)
Set the recording frame rate and image quality. The
settings will be applied to all cameras.
[Frame rate]
Select the recording frame rate.
1 ips/ 3 ips/ 5 ips/ 10 ips/ 15 ips/ 30 ips
Default: 10 ips
Important:
• When the compression method of the camera is
MJPEG, 10 ips, 15 ips and 30 ips are unavailable.
The default is "5 ips".
[Image quality]
Select the recording image quality.
NQ (Normal): Standard quality
FQ (Fine): High quality
SF (Super Fine): Super fine quality
XF (Extra Fine): Extra fine quality
Default: FQ
Note:
• If "XF" is selected when the compression method
of the camera is "MJPEG", "SF" will be set
instead of "XF".
39