Safety - Great Dane GDWG17KAE Operator's Manual

Safety

Understanding The Machine Safety Labels
The machine safety labels shown in this section are placed
in important areas on your machine to draw attention to
potential safety hazards.
On your machine safety labels, the words DANGER,
WARNING and CAUTION are used with this safety-alert
symbol. DANGER identifies the most serious hazards.
The operator's manual also explains any potential safety
hazards whenever necessary in special safety messages
that are identified with the word CAUTION and the safety-
alert symbol.
DANGER/POISON
• Shield eyes explosive gases can cause blindness or
injury.
• No sparks, flames, smoking.
• Sulfuric acid can cause blindness or severe burns.
• Flush eyes immediately with water get medical help fast.
• Keep out of the reach of children.
• Do not tip.
• Keep vent caps tight and level.
SAFETY
CAUTION
MIF
• This product is designed for professional and
commercial users.
• Operation training is required.
• Carefully read safety instructions.
• Know function of controls before operating.
• Practice with cutter blades off until confident.
• Clear mowing area of all debris.
• Keep all guards, covers and shields in place while
working.
• Do not disable or bypass any safety device.
• Always wear safety goggles while operating.
• Always park machine on level surface.
• Avoid contact with cutter blades; They may be rotating.
• Keep children and others clear from area.
MX9292 MX9258
• Set ground speed control to safe speed.
• Slowly and smoothly move speed control levers to start
and stop machine.
• Reduce speed and avoid sharp turns.
• Be careful on slopes; do not mow where stability or
traction is in doubt.
• To obtain additional operator manual and safety
instructions, contact Great Dane dealer or write Great
Dane Power Equipment, 4700 New Middle Rd.,
Jeffersonville, IN 47130, USA.
Safety - 1
MX9295 MX9258