Assembly Instructions - Bionaire BCH9440-CN Instruction Leaflet

A S S E M B LY I N S T R U C T I O N S
appliance must not be supplied through an external
switching device, such as a timer, or connected to a
circuit that is regularly switched on and off by the utility.
22. WARNING: In order to avoid overheating, do not cover
the heater.
23. WARNING: This heater is not equipped with a device to
control the room temperature. Do not use this heater in
small rooms when they are occupied by persons not
capable of leaving the room on their own, unless
constant supervision is provided.
PLEASE READ AND SAVE
THESE IMPORTANT
SAFETY INSTRUCTIONS
TECHNICAL SPECIFICATIONS
• Amps: 12.5
• Wattage: 1500W (+5% –10%)
• Working voltage: 120V AC/60Hz

ASSEMBLY INSTRUCTIONS

NOTE: A Phillips screwdriver is required for assembly.
Unpack your heater from the box, being careful to
remove all parts from plastic bags and remaining
packaging. Please save the carton for off-season storage.
Your model is packed with separate base and pedestal in
the box. Carefully remove all parts from plastic bags. To
prevent scratches, place all parts onto a cloth before
assembly. Follow the below instructions for Pedestal/Base
assembly:
Pedestal Assembly
Step 1: Run the power cord through the center of the
assembled pedestal. Snap pedestal into the
bottom of the heater housing. Refer to Figure
1, 2.
Figure 1
Figure 2
Figure 3
Figure 4
Figure 5