Simplicity LTH series Service Manual page 163

15. Install the second sun gear in the primary carrier
assembly.
NOTE: The convex or pointed end of the second sun
gear must point inward toward the housing assembly.
16. Lubricate and assemble the three planetary gears on
the secondary carrier assembly.
17. Install the secondary carrier, aligning and engaging
the three planetary gears with the ring gear assembly
and second sun gear.
18. Install the brake gear on the shaft.
Figure B–85. Install Second Sun Gear
Figure B–86. Assemble Secondary Carrier Assembly
Figure B–87. Install Secondary Carrier Assembly
Figure B–88. Install Brake Gear
7 - 33
7 Transmission Repair
7B Eaton 750 / 751