Simplicity LTH series Service Manual page 161

6. Carefully install the motor rotor assembly onto the
motor journal inside the transaxle housing.
NOTE: If a rubber band was used to retain the ball pis-
tons, remove it at this time.
7. The first sun gear is longer than the second sun gear.
8. Install the first sun gear into the motor rotor assem-
bly.
9. Install the two dowel pins and the gasket on the
transaxle housing.
NOTE: There are three identical gaskets used on the
transaxle housing.
Figure B–77. Install Motor Rotor Assembly
First Sun Gear
Figure B–78. First and Second Sun Gears
Figure B–79. First Sun Gear Installation
Dowel Pins
Figure B–80. Dowel Pins and Gasket Installation
7 - 31
7 Transmission Repair
7B Eaton 750 / 751
Second Sun Gear