Telnet - D-Link DIR-300 User Manual

DIR-300 Wireless N 150 Home Router
User Manual

Telnet

On the System / Telnet page, you can enable or disable access to the device settings via TELNET
from your LAN. By default, access is enabled.
To disable access via TELNET, deselect the On checkbox and click the Change button.
To enable access via TELNET again, select the On checkbox. In the Port field, enter the number of
the router's port through which access will be allowed (by default, the port 23 is specified). Then
click the Change button.
Figure 127. The System / Telnet page.
Page 166 of 170
Configuring via Web-based Interface