Static Ip Connection - D-Link DIR-300 User Manual

DIR-300 Wireless N 150 Home Router
User Manual

Static IP Connection

In the Connection name field, specify a name for the connection for easier identification.
Fill in the IP Address and Netmask fields.
In the Gateway IP address field, enter the IP address of the gateway used by this WAN
connection.
In the Primary DNS server field, enter the address of the primary DNS server.
As a rule, the specified settings are enough to configure a connection of the selected type. If you
need to specify additional settings, open the expert settings mode. To do this, use the switch in the
bottom left corner of the page.
Figure 31. Configuring Static IP WAN connection.
Page 43 of 170
Configuring via Web-based Interface