D-Link DIR-300 Manual

Setup port forwarding

Hide thumbs Also See for DIR-300:

Download this manual See also: User Manual

Setup Port Forwarding

This document will detail how to setup Port Forwarding on the DIR-300.

Setting up Port Forwarding on the DIR-300 allow applications that require access to the

Internet with unrestricting and or limited access. This is usually the case of Firewall/NAT

implementations used in Routers (and Wireless Routers) today.

D-Link Technical

Support – How to setup Port Forwarding on the DIR-300.

Page 1 of 4

Page 1 This document will detail how to setup Port Forwarding on the DIR-300. Setting up Port Forwarding on the DIR-300 allow applications that require access to the Internet with unrestricting and or limited access. This is usually the case of Firewall/NAT implementations used in Routers (and Wireless Routers) today.
Page 2 Ports to be binded to. It is not recommended to have a Port Forward entry on a connected computer/laptop without a Static IP Address assigned and or a DHCP Reservation setup on the DIR-300. This guide will advise on the DHCP Reservation setup. To ensure your computer/laptop always get the same IP Address, see below: Click on SETUP >...
Page 3 Save Settings button either at the top or bottom of the Web Configuration. You should now see as example the below: 4. Now click on ADVANCED menu. D-Link Technical Support – How to setup Port Forwarding on the DIR-300. Page 3 of 4...
Page 4 There are many ways in which to obtain the Ports needed for your Application, including referring to your application documentation to searching online. Please remember to ensure your DIR-300 has the most current firmware version applied. To apply this firmware please refer to the Technical Support Knowledge Base.