Adjusting The Sealing Temperature And The Sealing Speed - Pfaff 8303-040 Instruction Manual

9

Adjusting the sealing temperature and the sealing speed

.06
Fig. 9 - 08
Switch on the machine, see Chapter 8.03 Switching the machine on/off.
Press the P key twice (the letters "SP" appear in front of the temperature display).
Reduce the sealing temperature by pressing key 1, or increase it (max. 650 ºC) by
pressing key 2.
During the adjustment, the desired sealing temperature level is displayed, shortly after
the adjustment the actual temperature of the hot air nozzle automatically appears on the
display again.
Adjust the sealing speed by turning regulator 3 (min. 1 m/min).
All machine settings are always dependent on the workpiece. The optimum
settings for sealing temperature and sealing speed can established by sewing a
test seam.
K1 K2
P 1
The LED K2 lights up, when energy is being supplied to the hot air nozzle.
3
2
Fig. 9 - 09
Setting up
9 - 5