Malfunctions - Pfaff 8303-040 Instruction Manual

10

Malfunctions

.03
Fig. 10 - 03
If malfunctions occur during the sealing sequence, e.g. if the hot air pressure is too low
(< 0.2 bar), diode 1 flashes rapidly.
Eliminate the cause of the malfunction.
Acknowledge the malfunction by switching the machine off and then on again.
Error messages on the display
Display
1999
1
Remedy
Change the temperature sensor, see Chapter 12.08 Changing the
temperature sensor.
Heat sealing
Fig. 10 - 04
10 - 4