Alarm Temp. Setting (High Alarm/Low Alarm) - Panasonic MDF-U700VX-PB Operating Instructions Manual

RUNNING OPERATION (MENU/Set)

Alarm temp. setting (High Alarm/Low Alarm)

As an example, Table 2 shows the procedure to set the high temperature alarm so that the alarm can
activate when the chamber temperature is 5
Table 3 shows the procedure to set the low temperature alarm so that the alarm can activate when the
chamber temperature is 5
alarm and the low temperature alarm after fifteen minutes. (Factory setting)
(The chamber setup temperature ± 10
Alarm temperature settable range: between chamber temperature -/+5 and -/+40
Table 2. Procedure for setting high temperature alarm (Change from +10
Description of operation
1
2 Press the MENU button.
3 Press the ENTER key.
Select High Alarm by pressing Shift
4
keys.
Figure input key is pressed in order
5
of 0 , 5.
6 Press the MENU button.
7 Press the ENTER key.
Table 3. Procedure for setting low temperature alarm (Change from -10
Description of operation
1
2 Press the MENU button.
3 Press the ENTER key.
Select Low Alarm by pressing Shift
4
keys.
Figure input key is pressed in order
5
of 0 , 5.
6 Press the MENU button.
7 Press the ENTER key.
Note:
The setting mode returns to the temperature display mode automatically when 90 seconds has passed
without any key operation.
o
C higher than the set temperature.
o
C lower than the set temperature. The buzzer rings with the high temperature
o
C at the time of the factory setting.)
Key operated
MENU
ENTER
0
MENU
ENTER
Key operated
MENU
ENTER
0
MENU
ENTER
Indication after operation
----- Top screen is displayed
The menu window is indicated.
"set" is highlighted.
Temp. Setting window indicated. And set
value of temperature is highlighted.
The set value 10 of the high temperature
alarm (High Alarm) is highlighted.
High temperature alarm is changed from
5
+10 to +5.
The menu window is indicated.
"OK" is highlighted.
High temperature alarm is memorized, and
the top screen is indicated.
Indication after operation
----- Top screen is displayed
The menu window is indicated.
"set" is highlighted.
Temp. Setting window indicated. And set
value of temperature is highlighted.
The set value 10 of the low temperature
alarm (Low Alarm) is highlighted.
Low temperature alarm is changed from -10
5
to -5.
The menu window is indicated.
"OK" is highlighted.
Low temperature alarm is memorized, and
the top screen is indicated.
19
o
C.
o o
C to +5 C)
And the
And the
o o
C to -5 C)
And the
And the