Examples Of Power Over Ethernet Powered Device - Interlogix IFS ES2001-4P-4T User Manual

2.8 Examples of Power over Ethernet Powered Device

The below devices are typical examples of PoE powered devices. The power ratings (in watts) are given as a
guideline only. Please refer to the instructions of the powered device for accurate information.
Voice over IP phones
Enterprise can install POE VoIP Phone, ATA and other Ethernet/non-Ethernet end-devices to the
central where UPS is installed for un-interrupt power system and power control system.
3~5 watts
Wireless LAN Access Points
Museum, Sightseeing, Airport, Hotel, Campus, Factory, Warehouse can install the Access Point
anywhere with no hesitation
6~12 watts
IP Surveillance
Enterprise, Museum, Campus, Hospital, Bank, can install IP Camera without limits of install
location – no need electrician to install AC sockets.
10~12 watts
PoE Splitter
PoE Splitter split the PoE 48V DC over the Ethernet cable into 5/9/12V DC power output. It frees the
device deployment from restrictions due to power outlet locations, which eliminate the costs for
additional AC wiring and reduces the installation time.
3~12 watts
Figure 2-7 Department / workgroup PoE Switch connection
IFS ES2001-4P-4T User Manual
13