Typical Uses - Interlogix IFS ES2001-4P-4T User Manual

Note:
Cable distance for Switch: The cable distance between the ES2001-4P-4T and PC should not exceed 100 meter for
UTP/STP cable.
Make sure the wiring is correct: It Category 3/4/5 cable can be used in 10 Mbps operation. To reliably operate your
network at 100Mbps, you must use an Unshielded Twisted-Pair (UTP) Category 5 cable, or better Data Grade cabling.
Use of CAT3 or CAT4 cables with 100Mbps may cause data loss.

2.7.2 Typical Uses:

Providing up to 4 PoE, in-line power interfaces, the Switch can easily build a power central-controlled IP phone
system, IP camera system, AP group for the enterprise. For instance, 4 camera / AP can be easily installed around
the corner in the company for surveillance demands or build a wireless roaming environment in the offices.
Without the power-socket limitation, the switch makes the installation of cameras or WLAN AP more easily and
efficiently.
Figure 2-6 End node or Switch connection
12
IFS ES2001-4P-4T User Manual