Product Application; Connecting End Node Or Switch - Interlogix IFS ES2001-4P-4T User Manual

Step 6: Proceeds with the steps 4 and steps 5 of session 2.5 Desktop Installation to connect the network cabling
and supply power to your Switch.

2.7 Product Application

2.7.1 Connecting end node or switch

1. Place the ES2001-4P-4T on a smooth surface or fasten the mounting brackets purchased separately with the
provided screws in a standard 19" rack.
2. Connect the power cord to the power inlet socket of ES2001-4P-4T and the other end into the local power
source outlet. When the Switch receives power, the Power LED should remain solid Green.
3. Connect other switch or PC to one port of the ES2001-4P-4T using Category 3/4/5 UTP/STP cabling.
4. Connect another switch or PC to the other port of ES2001-4P-4T by following the same process as described
in Step 3.
Figure 2-5 Mounting the Switch in a Rack
11
IFS ES2001-4P-4T User Manual