DLQ-3000+
1.3.3 Paper Feed Specification
1.3.3.1 Friction Feed (Cut sheet)
Paper Path
Single sheet, envelopes
Multi-part form
Notes:
1. Set the release lever to "FRICTION".
2. Do not load continuous paper (including folding paper).
3. Set the longer side of the envelope horizontally.
4. When setting No.6 envelope, align the left sheet edge guide with the marked position.
1.3.3.2 Tractor Feed (Continuous paper)
Paper Path
Rear entry push tractor feed with paper parking function
Notes:
1. Set the release lever to "TRACTOR".
2. Do not perform reverse feed for more than 1/6 inch.
3. Set the left and right sheet edge guides to the right and left ends of the front paper
guide, respectively.
1.3.3.3 Paper Feed Speed and Accuracy
Minimum feed length
Feed speed
1/6 inch line feed
Continuous feed
1-10
Front and rear insertion (Manual/CSF insertion)
Rear entry (Manual/CSF insertion)
1/360 inch (1/6, 1/8 or programmable with the
increment of 1/360 inch)
42 ms
6.0 IPS (inch/second)
0.152 MPS (m/second)
Rev. A