Front - Mercedes-Benz Sprinter Operator's Manual

correctly at all times. Have the headlamp
setting checked regularly.
Always switch off the vehicle's lighting
R
system before changing a bulb.
This will prevent a short circuit.
Do not touch the glass tube of new bulbs
R
with your bare hands. Always use a clean,
lint-free cloth or only touch the base of the
bulb when installing.
Even minor contamination can burn into
the glass surface and reduce the service life
of the bulbs.
Do not use a bulb that has been dropped or
R
that has scratches on its glass tube.
The bulb could may explode.
Only use bulbs in closed lamps which have
R
been designed for this purpose.
Only use spare bulbs of the same type and
R
with the prescribed voltage
Protect the bulbs from moisture when in
R
use.
If the new bulb still does not light up, consult
a qualified specialist workshop.
Have the LEDs and bulbs of the following
R
lamps changed at a qualified specialist
workshop:
the additional turn signals in the exterior
-
mirrors
the high-mounted brake lamp
-
the Bi-Xenon bulbs
-
front fog lamps
-
If you require assistance changing bulbs,
consult a qualified specialist workshop.
Front bulbs
Overview of bulb types
Lights
:
Additional turn signal
lamps in the exterior
mirrors
;
Turn signal lamps
=
Halogen headlamps:
low-beam headlamps
Bi-Xenon headlamps:
low-beam/high-beam
headlamps
?
Halogen headlamps:
high-beam headlamps
Cornering lamps
A
Fog lamps
B
Parking lamps/
standing lamps
Changing bulbs
Bulb type
PY 16 W
PY 21 W
H7 55 W
D1S–35 W
H7 55 W
H7 55 W
H11 55 W
WY 5 W
Z
97