Auto White Balance Nd Filter Compensation - Sony MVC-FD97 Service Manual

11. Auto White Balance ND Filter Compensation

Adjust to the proper auto white balance output data with Built-in
ND filter.
If it is not correct, auto white balance and color reproducibility
will be poor.
Mode
Subject
Adjustment Page
Adjustment Address
Note 1: Perform "Auto White Balance Standard Data Input" be-
fore this adjustment.
Note 2: Check that the data of page: 6, address: 02 is "00". If
not, turn the power of the unit OFF/ON.
Note 3: "Auto White Balance ND Filter Compensation" is avail-
able only once after the power is turned on. Turn the
power off, then on again if the adjustment is retried.
Adjusting method:
Order Page Address Data
1 0 01 01
2 5 F1 FF
3 D 63 40
4
5 F 27
6 F 27 80
7 6 1C 03
8
9 6 01 11
10 6 01 09
11 6 02
Note 4: The adjustment data will be automatically input to
page: F, address: 4F and 50.
Processing after Completing Adjustment:
Order Page Address Data
1 6 01 00
2 6 1C 00
3 F 27
4 5 F1 00
5 D 63 00
6
7 0 01 00
CAMERA
Clear chart
(Color reproduction adjustment
frame)
F
4F, 50
Procedure
Press PAUSE button.
Perform "Data setting during
camera system adjustment".
(Refer to page 5-14)
Note down the data.
Press PAUSE button.
Press PAUSE button.
Wait for 1 second.
Press PAUSE button.
Press PAUSE button. (Note 4)
Check the data changes to "01".
Procedure
Press PAUSE button.
Set the data noted down at
step 5, and press PAUSE
button.
Press PAUSE button.
Release the data setting
performed at step 4.
(Refer to page 5-14)
5-23