Ipv6 Pppoe Or Pppoe Dual Stack Connection - D-Link DIR-620 User Manual

DIR-620 Wireless N300 Router with 3G/CDMA/LTE Support
and USB Port
User Manual

IPv6 PPPoE or PPPoE Dual Stack Connection

In the Connection name field, specify a name for the connection for easier identification.
In the Username field, enter your login, and in the Password and Password confirmation
fields – the password provided by your ISP.
If you need to specify the gateway address manually, deselect the SLAAC checkbox and fill in the
Static IPv6 gateway address field.
As a rule, the specified settings are enough to configure a connection of the selected type. If you
need to specify additional settings, open the expert settings mode. To do this, use the switch in the
bottom left corner of the page
Creating IPv6 PPPoE or PPPoE Dual Stack WAN Connection section, page 92).
Click the Next button to continue.
After that the page displaying all specified settings opens. Click the Apply button to create the
connection or the Back button to specify other settings.
After clicking the Apply button, the page for checking the Internet availability opens (see the
Checking Internet Availability section, page 65).
Figure 28. Configuring IPv6 PPPoE WAN connection.
(for a detailed description of all the connection's parameters, see the
Page 47 of 225
Configuring via Web-based Interface