3G Connection - D-Link DIR-620 User Manual

DIR-620 Wireless N300 Router with 3G/CDMA/LTE Support
and USB Port
User Manual

3G Connection

In the Connection name field, specify a name for the connection for easier identification.
In the Username field, enter your login, and in the Password and Password confirmation
fields – the password provided by your 3G operator.
In the APN field (for GSM USB modems only), enter the access point name, and in the Dial
number field, enter the number dialed to connect to the authorization server of the operator.
As a rule, the specified settings are enough to configure a connection of the selected type. If you
need to specify additional settings, open the expert settings mode. To do this, use the switch in the
bottom left corner of the page
Creating 3G WAN Connection section, page 125).
Click the Next button to continue.
After that the page displaying all specified settings opens. Click the Apply button to create the
connection or the Back button to specify other settings.
After clicking the Apply button, the page for checking the Internet availability opens (see the
Checking Internet Availability section, page 65).
Figure 44. Configuring 3G WAN connection.
(for a detailed description of all the connection's parameters, see the
Page 63 of 225
Configuring via Web-based Interface