Status; Network Statistics - D-Link DIR-620 User Manual

DIR-620 Wireless N300 Router with 3G/CDMA/LTE Support
and USB Port
User Manual

Status

The pages of this section display data on the current state of the router:

network statistics

•
IP addresses leased by the DHCP server
•
the routing table
•
data on devices connected to the router's network and its web-based interface
•
active sessions
•
addresses of active multicast groups.
•
Network Statistics
On the Status / Network statistics page, you can view statistics for all connections existing in
the system (WAN connections, LAN, WLAN). For each connection the following data are
displayed: name and state (when the connection is on, its name is highlighted in green, when the
connection is off, its name is highlighted in red), IP address and subnet mask, gateway (if the
connection is established), MAC address, MTU value, and volume of data received and transmitted
(with increase of the volume the units of measurement are changed automatically: byte, Kbyte,
Mbyte, Gbyte).
Figure 60. The Status / Network statistics page.
Page 80 of 225
Configuring via Web-based Interface