Creating Pppoe Ipv6 Or Pppoe Dual Stack Wan Connection - D-Link DIR-806A User Manual

DIR-806A Wireless AC750 Dual Band Router
User Manual

Creating PPPoE IPv6 or PPPoE Dual Stack WAN Connection

To create a connection of the PPPoE IPv6 or PPPoE Dual Stack type, click the Add button on the
Connections Setup / WAN page in the Connections List section. On the opened page, go to
the All Settings tab. Then select the relevant value from the Connection type drop-down list
and specify the needed values.
Figure 71. The page for creating a new PPPoE IPv6 connection. Selecting a connection type.
Parameter
Enable connection
Connection name
Move the switch to the right to enable the connection.
Move the switch to the left to disable the connection.
A name for the connection for easier identification.
Page 83 of 180
Description