Vermont Castings NBST27 Installation Instructions Manual page 17

LOG PLACEMENT
5. Place log #5 by placing rectangular notch
on bottom of log onto matching rectangu-
lar protrusion on log #2. Make sure ember
or 'burnt' portion of log is facing center of
burner. Figure 22
Continue on Side B, valve on right as you face the fireplace.
LG655
Figure 23 -
Place Log #6
LG655
NBST log 6
7. Place log #7 on left two (2)
grate tines by aligning the 'V'
notch in log with grate tines.
Make sure groove on bottom
of log is firmly seated on grate
bar. Figure 24
81D3032
Log #6
Log #5
Figure 22 -
Place Log #5
Log #1
6. Place log #6 on pilot end of burner by aligning
the 'V' notch in bottom of log with the filler brack-
et surrounding the pilot. Place the rectangular
notch in the bottom of the log onto the rectangu-
lar protrusion on the end of log #1. Figure 23
Control Valve
Figure 24 -
Place Log #7
LG656
NBST log 7
NBST27 Unvented Gas Log Set
LG654
NBST log 5
Log #7
LG654
LG656
17