Table of Contents
Advertisement
2. Authentication and its Application
5.
In the line for the administrator you want to change, press [Administrator 1], [Administrator
2], [Administrator 3] or [Administrator 4], and then press [Change].
2
6.
Press [Change] for the setting you want to change, and re-enter the setting.
7.
Press [OK].
8.
Press [OK] twice.
You will be logged off.
9.
Press the [User Tools] key.
• p.33 "Logging on Using Administrator Authentication"
• p.35 "Logging off Using Administrator Authentication"
Using Web Image Monitor
Using Web Image Monitor, you can log on to the machine and change the administrator settings. This
section describes how to access Web Image Monitor.
For details about Web Image Monitor, see Web Image Monitor Help.
1.
Open a Web browser.
2.
Enter "http://(the machine's IP address or host name)/" in the address bar.
When entering an IPv4 address, do not begin segments with zeros. For example: If the address is
"192.168.001.010", you must enter it as "192.168.1.10" to connect to the machine.
The top page of Web Image Monitor appears.
3.
Click [Login].
4.
Enter the login name and password of an administrator, and then click [Login].
5.
Make settings as desired.
38
Advertisement
Table of Contents
