11
SERVICE WORK ON THE CHASSIS
11.42
Checking the frame
11.43
Checking the swingarm
11.44
Checking the routing of the throttle cable
x
–
Check the frame for cracking and deformation.
»
If the frame exhibits cracking or deformation due to a mechanical impact:
–
Change the frame.
402015-01
x
–
Check the swingarm for damage, cracking, and deformation.
»
If the swingarm shows signs of damage, cracking, or deformation:
–
Change the swingarm.
401520-01
Preparatory work
–
Remove the seat. (
–
Remove the fuel tank.
Main work
(125 TC EU)
–
Check the routing of the throttle cable.
The throttle cable must be routed along the back of the handlebar, to the right
of the frame, below the fuel tank bracket, and to the carburetor.
»
If the throttle cable is not routed as specified:
–
L01920-10
x
Info
A frame that has been damaged due to a mechanical impact must
always be changed. Repair of the frame is not authorized by Husq-
varna.
x
Info
A damaged swingarm must always be changed. Repair of the
swingarm is not authorized by Husqvarna.
p. 42)
(
p. 45)
x
Correct the routing of the throttle cable.
51