Removing The Lower Bezel - Lenovo ThinkServer TS100 Hardware Maintenance Manual

Removing the lower bezel

When you work with some devices, such as the drives in bays 4 through 7 (or bays
4 through 11 for some 2.5 inch hard disk drive models), you must first remove the
lower bezel to access the devices.
To remove the lower bezel, complete the following steps:
1. Read the safety information that begins on page vii and "Installation guidelines"
2. If you are replacing a non-hot-swap component, turn off the server and all
3. Unlock the side cover.
4. Press the round blue release button on the right side of the lower bezel and
5. If you are instructed to return the lower bezel, follow all packaging instructions,
64
ThinkServer TS100 Types 6431, 6432, 6433, and 6434: Hardware Maintenance Manual
on page 57.
attached devices; then, disconnect all power cords and external cables.
Note: You do not have to remove the side cover to remove the lower bezel.
rotate the lower bezel downward to disengage and remove it from the chassis.
and use any packaging materials for shipping that are supplied to you.