Canon iPF755 User Manual page 694

Printer Parts > Control Panel
Sys-
tem
Setup
9
678
Menu Settings
>
Setting Item
TrimEdge Reload
Rep.P.head Print
Nozzle Check
Use RemoteUI
Reset PaprSetngs
Erase High Speed
HDD
Data
Secure High Spd.
Secure
Out- Print
put
Meth-
od
Print (Auto Del)
Save: Box 01
Print After Recv
Save: Shared Box
Description, Instructions
Specify On to have rolls cut when printing begins
after Sleep mode or when the power is restored. Se-
lecting Automatic will trim the edge when the roll
has been in the retracted position for two days or
more.
Choose On to have the printer automatically exe-
cute the Advanced Adj. operations after you re-
place the Printhead. (See "Automatic Adjustment
to Straighten Lines and Colors (Head Posi.
Adj.).")
→P.620
In Frequency, specify the timing for automatic
checks of nozzle clogging. Choose Standard to
have the printer adjust the timing for checks based
on the frequency of nozzle use. Choose 1 page to
check once per page.
Select Warning > On to display warnings if the
nozzles clog during printing.
Choosing Off prohibits access from RemoteUI.
Settings can only be configured from the control
panel.
Restores settings that you have changed with Me-
dia Configuration Tool to the default values.
Erases file management data for print job data stor-
ed on the printer's hard disk. (See "Erasing Data
on the Printer's Hard Disk.")
Overwrites the entire hard disk with random data.
(See "Erasing Data on the Printer's Hard Disk.")
→P.693
Overwrites the entire hard disk with 00, FF, and
random data (one time each). Verification is per-
formed to check if the data was correctly written.
(See "Erasing Data on the Printer's Hard Disk.")
→P.693
Select the printing method for jobs received from
software other than the printer driver. When using
the printer driver, configure settings on the printer.
To print as usual, select Print. Selecting Print
(Auto Del) will print the job and then delete the da-
ta from the printer's hard disk. Selecting Save: Box
01 will only save the print job in the box, without
printing it.
A setting for jobs received from software other than
the printer driver. When using the printer driver,
configure settings on the printer. Select On to print
the job after it has been saved.
Select Off to print without saving jobs in the box
shared among multiple users.
→P.693
iPF755