Canon iPF755 User Manual page 691

GL2 Line Smoothing
Set- & Pen
tings Man-
ager
ThickenFineLines
AdjustFaintLines
Proc- Warning
essin-
gOp-
On-the-Fly
tion
PageSizeProcess1
PageSizeProcess2
GL2 Set Print
Inter- EOP Timer
face
Setup
TCP/ IPv4
IP
iPF755
Setting Item
IPv4 Mode
Proto- DHCP
col
BOOTP
RARP
IPv4 IP Address
Set-
tings
Subnet Mask
Default G/W
DNS DNS Dync up-
Set- date
tings
Pri. DNS
SrvAddr
Sec. DNS
SrvAddr
Printer Parts
Description, Instructions
If you choose Smooth
•
Select On to print fine lines more distinctly.
If fine lines are printed in colors that do not match
the colors of other shapes, selecting Off may help
produce the expected results. However, lines in
some colors may appear broken.
Select On to have any GL2-related warnings dis-
played.
Selecting On will start printing jobs sooner if you
are printing only HP RTL print jobs and printing
would not start until later. However, images may
be incomplete in some cases, so be sure to check
the printing results.
Normally, the area available for printing excludes a
margin required by the printer, and images are
positioned accordingly. Selecting On in this setting
eliminates any misalignment of the printing posi-
tion if the image itself includes a border.
Selecting On will determine the paper size based
on the image rendering area.
Print GL2 settings information.
Specify the timeout period before cancellation of
print jobs that cannot be received by the printer.
Choose whether the printer IP address is configured
automatically or a static IP address is entered man-
ually.
Specify the protocol used to configure the IP ad-
dress automatically.
Specify the printer network information when us-
ing a static IP address.
Enter the IP address assigned to the printer, as well
as the network subnet mask and default gateway.
Specify whether DNS server registration is updated
automatically.
Specify the DNS server address.
> Control Panel >
9
675
Menu Settings