The Number Of Images That Can Be Recorded; Holding The Camera - Sony DSLR-A700 User's Manual / Troubleshooting

Il' I DJ
jlB-InI<,.l..
",u+1
~
o Ilml:; 11111
~
...-i
lAWS
_"'I
ANO
Iccl..
ll00
III 0uIdr: NnI U CrMIM
The number of images that can be recorded
Once you insert a memory card into the camera and set the POWER
switch to ON, the number of images that can be recorded (should you
continue to shoot using the current settings) is displayed on the LCD
monitor.
To identify items on the LCD monitor
-+
"User's Guide!
Troubleshooting" (page 20)
• The number of images that can be recorded on a memory card differs depending on the capacity of the
memory card. the image size setting, and the image quality setting.
-+
"User's GuidelTroubleshoolillg"
(page 24)
• If "0" is flashing in yellow, the memory card is full. Replace the memory card with another one, or delete
images in the current memory card (pages 8, 18).
• Since the data amount of each image is different, the remaining number of recordable images may not
change after shooting.
Holding the camera
Hold the camera steady to avoid blurring of images due to hand movement. Turning on the
Super SteadyShot function is also recommended (page 14).
• Grip the camera firmly with your right hand, keep your elbows
at
your side, and suppor! the lens with the
palm of your left hand.
• Step out with one foot
to
stabilize your upper body. Leaning against a wall or putting your elbow on a
table will also provide support.
• When shooting in dark light without the flash, shooting in macro, or using a telephoto lens, camera shake
that cannot be compensated for by the camera tends
to
occur. In such cases, tum off the Super SteadyShOl
function and use something to stabilize the camera, such as a tripod.
13