Sony DSLR-A700 User's Manual / Troubleshooting page 155

Digital single lens reflex camera
Hide thumbs Also See for DSLR-A700:
Table of Contents

Advertisement

Also see "PictBridge compliant printer" (as follows) in conjunction with the following items.
The color of the image is strange.
• When you print the images recorded in Adobe RGB mode using sRGB printers that are not
compatible with Adobe RGB (DCF2.0/Exif2.21), the images are printed at a lower intensity
level (page 72).
Images are printed with both edges cut off.
• Depending on your printer, the left, right, top, and bottom edges of the image may be cut off.
Especially when you print an image shot with the aspect ratio set to [16:9], the lateral end of
the image may be cut off.
• When printing images using your own printer, cancel the trimming or borderless settings.
Consult the printer manufacturer as to whether the printer provides these functions or not.
• When having images printed at a digital print shop, ask the shop whether they can print the
images without cutting off both edges.
Cannot print images with the date.
• Using "Picture Motion Browser", you can print images with date (page 137).
• This camera does not have a feature for superimposing dates on images. However, because
the images shot with the camera include information on the recording date, you can print
images with the date superimposed if the printer or the software can recognize Exif
information. For compatibility with Exif information, consult the manufacturer of the printer
or the software.
• When you print images at a shop, images can be printed with the date if you ask them to do so.
A connection cannot be established.
• The camera cannot be connected directly to a printer that is not compliant with the PictBridge
standard. Consult the printer manufacturer as to whether the printer is compliant with
PictBridge or not.
• Check that the printer is turned on and can be connected to the camera.
• Set [USB connection] to [PTP] (page 124).
• Disconnect and connect the USB cable again. If an error message is indicated on the printer,
refer to the operating instructions supplied with the printer.
Cannot print images.
• Check that the camera and the printer are properly connected using the USB cable.
• RAW data files cannot be printed.
• Images shot using cameras other than this camera or images modified with a computer may
not be printed.
155

Advertisement

Table of Contents
loading

Table of Contents