Flymo Minitrim ST Original Instructions Manual page 5

E
F
G
1
H
How to Trim
• WARNING
• The use of eye protection is recommended.
Do not lean over the trimmer whilst trimming or
edging, objects may be thrown by the cutting line.
Do not allow cutting head to rest on the ground.
Do not overload your trimmer.
Overloading can be avoided by making sure the
motor speed does not drop unduly.
DISCONNECT FROM THE MAINS ELECTRICITY
SUPPLY BEFORE ATTEMPTING ANY MAINTE-
NANCE OR ADJUSTMENT.
1. Cut with nylon line at an angle using the tip. (E).
2. Swing trimmer in and out of the cutting area taking
small cuts (F)
Using the Plant & Tree Guard (Minitrim Auto XT only)
The Plant and Tree Guard (J1) allows the trimming of
grass close to plants and trees without damaging
them with the cutting line.
1. Flip the guard down as illustrated in Fig G.
2. Use the trimmer around trees (H) and near plants.