Removal and Replacement Procedures - Ultra-Slim Desktop (USDT) Chassis
8.7 Front Bezel
1. Prepare the computer for disassembly
2. Remove the computer access panel
3. Remove any MultiBay device in the drive cage
4. Remove the MultiBay riser card
5. Remove the front panel assembly
6. Use a #0 Phillips screwdriver to remove the four screws that secure the front bezel to the
front panel assembly 1.
7. Release the catch 2 that keeps the top of the bezel in place. It may also be necessary to
release the catch that secures the bottom of the bezel in place.
8. Pull the front bezel away from the assembly 3.
To reinstall the front bezel, reverse the removal procedures.
✎
When installing the front bezel, make sure that the MultiBay eject lever is positioned nearest the
center of the bezel to ensure it will properly activate the eject mechanism.
8–8
(Section
8.1).
(Section
8.3).
(Section
8.4).
(Section
8.5).
(Section
8.6).
390742-001
Service Reference Guide, dc7600