Table of Contents
Advertisement
8.8 Chassis Fan
1. Prepare the computer for disassembly
2. Remove the computer access panel
3. Remove any MultiBay device in the drive cage
4. Remove the MultiBay riser card
5. Remove the front panel assembly
6. Remove the four screws that secure the chassis fan to the housing 1.
7. Remove the fan 2.
To install the fan assembly, reverse the removal procedures, making sure that the fan cable is
located near the top of the assembly nearest the center of the front panel assembly.
Service Reference Guide, dc7600
Removal and Replacement Procedures - Ultra-Slim Desktop (USDT) Chassis
(Section
8.1).
(Section
8.3).
(Section
(Section
8.5).
(Section
8.6).
390742-001
8.4).
8–9
Advertisement
Table of Contents
