The only Servicer electrical adjustments are picture position (centering). These adjustments are the same on all
chassis (V28 / V29 / V30 / V30+ / V31). They are also the same as last years DLP models. They are repeated here
as a reference.
Horizontal & Vertical Positioning
1) Press "MENU-2-4-5-7", activates the Service Mode..
2) Select the "FORMAT" function (AUDIO button).
3) Press "REWIND", activates the Overscan Test Pattern
4) Select "Item 1" HPOS (VIDEO button).
5) Use the ADJUST buttons to center the picture horizontally.
6) Press ENTER to save the new setting.
7) Select "Item 2" VPOS (VIDEO button).
8) Use the ADJUST buttons to center the picture vertically.
9) Press ENTER to save the new setting.
10) Press MENU to exit the Service Mode.
Electrical Adjustments
3-8