To Connect A Television - HP OmniBook 7100 Reference Manual

Note

To connect a television

At the time of this printing, Windows NT 4.0 does not support a television
connection. Check the HP website at http://www.hp.com/omnibook for updates.
If your television has an S-video port, you can connect it to the OmniBook and use
your television display as a monitor. Connect an S-video cable—available at most
computer stores—directly between the television and OmniBook. If your television
does not have an S-video port, you'll need to order the HP video cable adapter
(HP F1459A).
1. From the Start menu, shut down the OmniBook.
2. Connect the S-video cable to the OmniBook.
3. Connect the cable to the S-video port on the back of your television.
4. Turn on the OmniBook.
5. From the Start menu, click Settings, Control Panel, Display.
6. Click the Settings tab, then select TV. (You can select any or all of the choices:
CRT, TV, LCD).
NTSC and PAL Television Standards
If your television uses the PAL standard, you'll need to change the BIOS setting from
NTSC to PAL.
1. From the Start menu, shut down, then restart the OmniBook.
2. When you see the HP logo, press F2 to enter the BIOS Setup utility.
3. From the Main menu, select Television Type, then select PAL.
4. Press F10 to save and exit.
Making Connections
Connecting External Devices
4-13