To Suspend The Omnibook When Closing The Display - HP OmniBook 7100 Reference Manual
Hide thumbs
Also See for OmniBook 7100:
- Reference manual (146 pages) ,
- Service manual (87 pages) ,
- User manual (53 pages)
Table of Contents
Advertisement
To suspend the OmniBook when closing the display
By default, the OmniBook display turns off when you close the display lid. You can
change this setting to suspend the OmniBook when you close the display lid.
1. Close all applications, then shut down Windows and restart the OmniBook.
2. When you see the HP logo, press F2 to enter the BIOS Setup utility.
3. From the Power menu, choose Lid Switch Mode.
4. Choose one of the following options:
•
Turn off LCD.
turn on the display again.
•
Closing the lid suspends the OmniBook and increases power
Suspend.
savings. Press the blue power button to turn on the display again.
5. Press F10 to save and exit the BIOS Setup utility.
Closing the lid turns off the display (default). Open the lid to
Operating the OmniBook
Using the OmniBook Display
2-11
Advertisement
Table of Contents
