Step 2: Connect The Computer To External Power - HP Compaq Series Getting Started

Step 2: Connect the computer to external
power
To connect the computer to external AC power:
1. Plug the AC adapter cable 1 into the power connector.
(The power connector is on the rear of the computer.)
2. Plug the power cord 2 into the AC adapter, and then into
an AC outlet 3.
When the computer receives AC power, the battery pack begins
to charge and the battery light (on the front of the computer) 4
is turned on. When the battery pack is fully charged, the battery
light is turned off.
Getting Started
DRAFT Revised: 8/26/05
File: Chap1.fm
PN: HP-403067-001
h p C O N F I D E N T I A L
First-time setup
1–11