To install a RAM expansion module
Your OmniBook's computer chips are extremely static-sensitive. Static electricity can
permanently damage computer chips. Before starting, reading the caution on
page 5-6 about how to handle RAM expansion modules.
1. From the Start menu, shut down the OmniBook.
2. Unplug the ac adapter, if present, and remove the battery. (Remove a second
battery if one is installed.)
3. Turn the unit bottom side up and unsnap the RAM cover.
4. Insert the RAM board into the connector at about a 30° angle until it is fully
inserted. Then press down at both sides until both latches snap closed.
If only one RAM board is present, you can install it in either connector.
Expanding the OmniBook
Installing a RAM Expansion Module
5-7