HP OmniBook 7100 Reference Manual page 22

Introducing the OmniBook
Configuring the OmniBook with the BIOS Setup Utility
Power (APM)
Menu*
Power Management
Mode
Smart CPU Mode
Standby Time-out
Suspend Time-out
Hibernate Time-out
Hard Disk Time-out
Time-out on AC
Power Button Mode
Lid Switch Mode
Resume on Serial Ring
Resume on Time of Day
Resume Time
Auto Suspend on Undock
Auto Turn-on on Dock
* If you are using Windows 98 and have installed ACPI power management, the ACPI settings
override settings in the Power menu.
1-14
Disables time-outs, selects a combination of
time-outs, or allows customized time-outs.
Enables automatic CPU power savings. Absence of
keyboard, mouse, and hard disk activity could cause
slower CPU response.
Sets the period of inactivity after which the computer
goes from On to Standby power mode.
Sets the period of inactivity after which the computer
goes from Standby to Suspend power mode. (Skips
Standby mode if that time-out is disabled.)
Sets whether the computer goes from Suspend to
Hibernate power mode after the indicated period of
inactivity. (Skips Suspend mode if that time-out is
disabled.)
Sets the period of hard disk inactivity after which the
hard disk stops spinning. Also affects a hard disk
drive in the plug-in module bay.
Sets whether power management time-outs occur
while the ac adapter is connected.
Sets the action of the blue power button when
pressed for less than 4 seconds.
Sets the action when the OmniBook lid closes.
Sets whether the system resumes from Suspend if a
ring signal is received.
Sets whether the system resumes from Suspend at a
defined time of day.
Sets the 24-hour time when the system resumes from
Suspend if enabled.
Sets whether the OmniBook suspends after
undocking.
Sets whether the OmniBook turns on after docking.
Default
Max Power
Savings
Off
2 minutes
4 minutes
4 hours
2 minutes
Disabled
Suspend
Turn off LCD
Enabled
Disabled
When Lid
Closed
Enabled