Table of Contents
Advertisement
To configure the swing settings
Swing is a monitoring function that moves between two preset points and enables you to
trace the motion.
1. Select <Swing> in <Sequence
setup>.
The menu screen will switch to the
swing setting screen.
2. Select a swing setting mode.
• Pan : You can set the swing
monitoring using the PAN function.
• Tilt : You can set the swing
monitoring using the Tilt function.
• Pan&Tilt : You can set the swing monitoring only using both PAN and Tilt
functions.
3. Set <first preset> and <Second preset> to specify a swing range.
When moving to the second preset from the first preset, the camera will move to the right
`
J
direction on the screen.
If you set <Flip/Mirror> to <On> in the video setup, it will move in the opposite direction. (Page 89)
4. Set the moving speed and dwell time.
5. Press the [
The first preset, second preset, speed and dwell time will be saved in set mode.
6. Press the [
It performs the swing operation.
7. Press the [
The running swing will be stop.
If you want to set the swing, then you need at least two presets set already.
`
J
] button.
] button.
] button.
English _85
Hide quick links:
Advertisement
Table of Contents
