Inserting/Removing A Sd/Micro - Samsung SNP-6320 User Manual

installation & connection
inSertinG/removinG a SD/micro SD memory carD
The following models support the following SD cards:
`
J
(SNP-6320 : Micro SD card, SNP-6320H : SD card)
Disconnect the power cable from the camera before inserting the SD/Micro SD memory card.
`
inserting a SD/micro SD memory card
1. Open the cover in the rear of the camera.
(SNP-6320)
Using the screw driver, loosen 3 screws by turning them
counterclockwise and separate the dome cover.
(SNP-6320H)
2. Push the SD memory card in the direction of the arrow
shown in the diagram.
Do not insert the SD memory card while it's upside down by
`
J
force. Otherwise, it may damage the SD memory card.
36_ installation & connection