Samsung SNP-6320 User Manual page 24

installation & connection
Connecting the installation monitor
Connect the cable to the camera's rear video output terminal and the installation monitor's
video input terminal.
The wiring varies depending on your monitor type and peripheral devices; please refer to the user manual
`
for each device.
Please make sure the monitor and camera are turned off when connecting them.
`
This product is a network camera that transfers video over a network; the video output terminal is
`
J
used to set the imaging range of the camera at installation.
Using the terminal for monitoring purposes may cause problems such as degradation in video
`
quality.
It is not suitable for 24-hour monitoring using professional CRT monitors or TFT/LCD portable
`
monitors.
Use the network transfer screen for 24-hour monitoring and storage.
`
24_ installation & connection
AC- FG AC-
AUDIO OUT
AUDIO IN
IN1 IN2 GND IN3 IN4 GND 1.COM 1.NO 1.NC 2.COM 2.NO 2.NC
Monitor