NETGEAR D3600? D6000 User Manual page 31

Note: The option for power-cycling the modem router that is stated onscreen
applies to a DSL Internet connection only (see
Router for DSL Service
Take one of the following actions:
• If the yellow Ethernet cable is fully inserted in the correct places at the cable or fiber
modem and at the modem router, do the following:
a. Select the None of the above radio button.
b. Click the Next button.
• If the yellow Ethernet cable is not fully inserted or is inserted at a wrong place, do the
following:
a. Fully insert the Ethernet cable in the correct port on the cable or fiber modem
and in the red Internet port on the modem router.
b. Select the I corrected a problem with the Ethernet cable radio button.
c. Click the Next button.
19. (Only if the following screen displays) Specify how to manage problems with the detection of
the IP address for the Internet connection.
The screen that might display states that a problem occurred while detecting the Internet
connection IP address.
Install and Access the Modem Router and Its Network
N600 and AC750 WiFi DSL Modem Routers
on page 18).
31
Set Up Your Modem