NETGEAR D3600? D6000 User Manual page 181

7. Click the Add Service button.
8. Specify a new port triggering rule with a custom service or application as described in the
following table.
Field
Service Name
Service User
Service Type
Triggering Port
Inbound Connection
Connection Type
Starting Port
Ending Port
9. Click the Apply button.
Your settings are saved and the rule is added to the Port Triggering Portmap Table on the
Port Forwarding / Port Triggering screen.
N600 and AC750 WiFi DSL Modem Routers
Description
Enter the name of the custom service or application.
From the Service User menu, select Any, or select Single address and enter the IP
address of one computer:
• Any. This is the default setting and allows any computer on the Internet to use
this service.
• Single address. Restricts the service to a particular computer.
Select the protocol (TCP or UDP) that is associated with the service or application.
Enter the number of the outbound traffic port that must open the inbound ports.
Select the protocol (TCP or UDP) that is associated with the inbound connection.
If you are unsure, select TCP/UDP.
Enter the start port number for the inbound connection.
Enter the end port number for the inbound connection.
Manage Port Forwarding and Port Triggering
181