NETGEAR D3600? D6000 User Manual page 175

4. Enter the user name and password for the modem router.
The user name is admin. The default password is password. The user name and
password are case-sensitive.
5. Click the OK button.
The BASIC Home screen displays.
6. Select ADVANCED > Advanced Setup > Port Forwarding / Port Triggering.
The Port Forwarding / Port Triggering screen displays.
7. Make sure that the Port Forwarding radio button is selected.
8. Click the Add Custom Service button.
9. Specify a new port forwarding rule with a custom service or application as described in the
following table.
Field
Service Name
Protocol
External Start Port
External End Port
Internal Start Port
N600 and AC750 WiFi DSL Modem Routers
Description
Enter the name of the custom service or application.
Select the protocol (TCP or UDP) that is associated with the service or application.
If you are unsure, select TCP/UDP.
Enter the external start port number that the service or application uses.
Enter the external end port number that the service or application uses.
Specify the internal start port by one of these methods:
• Leave the Use the same port range for Internal port check box selected.
• Clear the Use the same port range for Internal port check box and enter the
internal start port number that the service or application uses.
Manage Port Forwarding and Port Triggering
175