Set Up Your Radiator Controller - homexpert evohome Installation & User Manual

Set up your Radiator
Controller
If you are adding one or more Wireless Zoning Radiator
Kits to an evohome Connected Pack you need to power
up the Radiator Controllers and then bind them to the
evohome Controller using the 'Installation Menu'.
It may be easier to power up and bind the
Radiator Controllers while they are close to
the evohome Controller – you can install
them in their assigned zones later.
When you bind a Radiator Controller to the
evohome Controller it permanently stores the
connection and there should never be a need
to rebind them even after a power cut.
In this section
Step 1: Power up and bind the Radiator Controller
Step 2: Install the Radiator Controller
Step 3: Wireless Signal Test
Advanced settings
Installation & User Guide
5
6
8
9
10