homexpert evohome Installation & User Manual page 11

Step 3: Wireless Signal Test
5
Installation & User Guide
Check the wireless signal strength
Check the wireless signal strength between
the Radiator Controller and the evohome
Controller (the evohome Controller should
be placed in its normal location).
on the Radiator Controller for the selected zone
5
6
7
8
9
10
6
PRESS hold
onCE 5 SEC
Press the button - the zone name is displayed
While the zone name is displayed press and
hold the button again for 5 seconds
Turn the dial to display RF CHECK
Press the button again - the
display should say CHECKING
Press the button again to send a test signal
to the evohome Controller - The Radiator
Controller will display a signal strength bar and
a rating from 1 (poor) to 5 (excellent) – 0 means
the Radiator Controller has not received a test
signal back from the evohome Controller.
To exit test mode turn the dial to exit and press the
button. It will exit automatically after 10 minutes.
8
7
9
PRESS
onCE
9