homexpert evohome Installation & User Manual page 13

Parameter list
Parameter Description
Display language
1 language
Sets the language of the interface on the display
Display backlight
2 backlight
Sets whether or not the display backlight comes on when
the adjustment dial is turned or the button is pressed
Auto window open duration
3 win time
When an open window or door is detected the radiator
valve will be closed for this period of time
Auto window open temperature fall rate
4 win dec
Rate at which the room temperature decreases before
Auto Window Open function closes the radiator valve
Auto window open temperature rise rate
5 win inc
Rate at which the room temperature rises before Auto
Window Open function opens the radiator valve
Valve stroke range
6 stroke
Sets the stroke range to suit the radiator valve
Temperature display
7 ROOMTEMP
Displays either the programmed set temperature or the
measured room temperature
Temperature offset
8 calibrate
Adjusts the measured temperature to compensate for the
location of the radiator controller
Battery type
9 battery
Sets the battery type used in the radiator controller -
Alkaline / Lithium / NiMH
Valve position display
10 valve pos
Briefly displays if the valve is open or closed when
enabled
Auto Window Open function
11 win type
Automatic window open detection
Factory reset
12 fullreset
Resets all parameter settings to factory default (does not
reset the stored binding data)
Press
13 exit
Installation & User Guide
to exit the settings menu
Available Settings
1 ... 6
= English*
2
= Disabled
0
= Enabled*
1
= Inactive
0
= Minutes*
30
= Minutes
90
0.2 ... 2.0
= 0.8°C per min*
0.8
0.2 ... 2.0
= 0.2°C per min*
0.2
= Standard stroke*
0
= Full stroke
1
= Set temperature*
0
= Room temperature
1
-3 ... 3
= 0°C offset*
0
= Alkaline*
0
= Lithium
1
= NiMH
2
= Disabled*
0
= Enabled
1
= Disabled
0
= Enabled*
1
= Disabled
0
= Full reset*
1
*recommended settings
11