homexpert evohome Installation & User Manual page 10

8
Step 2: Install the Radiator Controller
You may need to use
one of the adaptors
supplied with the
Wireless Radiator
Zoning Kit for your
radiator valve:
1. Slide the adaptor
onto the radiator
valve and turn it
until you feel it
click into place.
2. If necessary,
secure the
adaptor in place
with one of the
screws provided.
2
Steps 1 and 2 need to be repeated for each new zone you
are adding to the heating system.
Set up your Radiator Controller
Install the Radiator Controller on
the radiator
1
2
3
4
5
6
7
8
3
3
Locate the room (zone) for the radiator controller
Slide the locking mechanism
to the unlock position
Remove the adaptor from the bottom
of the Radiator Controller
Unscrew the black wheel fully anticlockwise
Remove any existing control
from the radiator valve
Screw the white end of the adaptor
on to the radiator valve
Push the Radiator Controller fully on to the
adaptor with the screen facing towards you
Slide the locking mechanism
to the locked position
4
REmovE
RoTATE
7